In the event you need to disable StopSign temporarily - please follow these steps:
NOTE - Please see the FIREWALL INSTRUCTIONS at the end of these steps if you need to disable the StopSign Firewall.
1) Click START > PROGRAMS > EACCELERATION > EACCELERATION SOFTWARE STATION.
2) Click FILE > SHUTDOWN ALL.
3) Click YES in the Shutdown All confirmation box.
FIREWALL INSTRUCTIONS
1) In the EACCELERATION SOFTWARE STATION click TOOLS > SETTINGS
2) Check the Box next to "Shutdown Firewall with 'Shutdown All'"
3) Click OK
For further assistance -
or
Additional user information may be found via the StopSign KNOWLEDGE BASE.